Causes of Excessive Fan Current during Operation of Vertical Raymond Mill
The complete set of equipment of vertical Raymond mill consists of multiple parts, including analyzer, host and fan. Recently, some customers asked why the fan current of the Raymond mill is too high. So I write down the following for your answers.
Firstly, you should check whether the air duct is blocked. Because the material is screened by the analyzer and then enters the powder collector through the pipeline to obtain the finished product. When the machine is switched on and off, weak wind will lead to fine powder precipitation. Over time, more and more fine powder is accumulated, which leads to material blocking the air duct and easy to make the fan current too high.
Secondly, when the vertical Raymond mill works, too fast feeding is easy to lead to blockage. Therefore, circulating air cannot be formed in the host and pipeline. When the wind force cannot reach, the function consumption of grinding roller and ring in the equipment is large.
Then you should check whether the belt of the fan drives. When the belt is loose, the wind force is insufficient and the materials cannot be blown up, so as to increase the current of the fan.
The above is the reason why the fan current of vertical Raymond mill is too high. Customers can ask us any questions at any time. Customers interested in the equipment of Gongyi Dayugou Gaofeng machinery factory can consult and test the machine on site at any time.
熱點新聞
Copyright 2011-2018 鞏義市大峪溝高峰機械廠 版權所有 豫ICP備11002320號 地址:河南鞏義市大峪溝鎮 電話:139-3822-0828 郵編:451271
Sitemap |
食用油灌裝機 |
電子萬能試驗機 |
氧化鋯珠 |
雷達液位計 |
五金配件加工 |
三通球閥 |